Find out how to enable 4K resolution and adjust video output settings on your PlayStation®5 console.
Video Output Information
View your current settings and TV capabilities.
Set the screen resolution.
4K Video Transfer Rate
Adjust the transfer rate for 4K resolution video. If you experience flickering on your screen, try selecting -1 or -2 to limit transfer speed, and possibly improve picture quality.
Allow the refresh rate to adjust in real time while using TVs and games that support VRR (variable refresh rate). Results vary depending on the TV you're using and if the PS5 game you 'e playing supports VRR.
PS5™ consoles support VRR through HDMI 2.1. Other display standards such as NVIDIA G-SYNC® and AMD FreeSync™ are not supported.
Turn on Apply to Unsupported Games to improve video quality for some PS5 games that don't support VRR. If you experience unexpected behavior while playing games, turn off this setting.
Set auto low latency mode (ALLM) to Automatic or Off.
If you select Automatic, your TV automatically switches to low-latency mode while playing games. If you select Off, ALLM won't be enabled, except when you're using VRR output.
Turn HDR (high dynamic range) on or off.
Enables fine brightness adjustments and optimized HDR rendering.
Deep Color Output
Enables smooth image rendering.
Change this only when you use an HDMI device that doesn't send RGB range information correctly.
Enable 120 Hz Output
Turn on to enable 120 Hz video output for your TV and games that support 120 Hz frame rate. If you experience video output problems with these games on a monitor or other display device, turn off this setting.
The PS5 console supports the HDMI 2.1 specification, and it also supports 4K 120Hz video output. As this emerging technology isn’t fully supported in the market, Sony Interactive Entertainment is working with TV manufacturers to improve performance and bring the best experience to console users. During this transition period, you may experience some issues with 4K 120 Hz.
If you encounter a situation where there’s nothing displayed on your TV when the PS5 console is expected to be outputting a 4K 120 Hz signal, or the signal is displayed as 1080p 120 Hz, please consider the following:
When you connect your PS5 console using an HDMI cable, the console sends an ALLM signal to the output device. If your TV supports this mode, ALLM is set to Automatic, and your output device starts in Low Latency Mode.
You can adjust ALLM by going to Settings > Screen and Video > Video Output > ALLM.
ALLM can be turned OFF when VRR is not enabled.
The latest system software is required for ALLM.
Please note, your PS5 console doesn’t send an ALLM signal when a media app is running.
Please check the manual of your TV to see if ALLM is supported. For more information, please contact the manufacturer.
Do all TVs with HDMI 2.1 have ALLM?
No, please check the instruction manual that came with the display device to check if it supports ALLM.
What cable is needed for PS5 consoles to use ALLM?
The HDMI cable included with the PS5 console is recommended. Otherwise, an Ultra-High-Speed HDMI Cable that supports HDMI 2.1 should support ALLM.
What HDMI port do I need to use on my TV?
If there is an HDMI port that supports HDMI 2.1, please use it to connect your PS5 console.
Contact our support specialists