Disc-Probleme auf PS5-Konsolen beheben

So behebst du Disc-Probleme auf PS5-Konsolen

Wenn du Disc-Probleme auf deiner PlayStation®5-Konsole hast, probiere diese Schritte zur Fehlerbehebung aus.

Troubleshoot PS5 console disc reading issues

Reinsert the disc into your console after each of these steps. 

  1. When your PS5™ console is oriented vertically on the console stand, the labeled side of the disc should face left as you insert it.
  1. Clean the disc with a soft, clean cloth to remove any dirt or prints.
  2. Try inserting another game, Blu-Ray disc, or DVD.
    PS5™-Konsolen können keine gebrannten Discs oder Audio-CDs abspielen.
  3. Öffne den gesicherten Modus und wähle Cache leeren und Datenbank neu erstellen aus.
  1. Wenn das Problem mit der Option Datenbank neu aufbauen nicht behoben werden kann, öffne den gesicherten Modus und wähle PS5 zurücksetzen (Systemsoftware neu installieren) aus.

Warnung: Wenn du PS5 zurücksetzen (Systemsoftware neu installieren) auswählst, werden alle Informationen auf der Konsole gelöscht, einschließlich der Systemsoftware. Über den nachstehenden Leitfaden kannst du die Version für die Neuinstallation der Systemsoftware für die PS5-Konsole herunterladen.

If these troubleshooting steps don't fix the issue, please visit PlayStation Repairs.

So entfernst du eine stecken gebliebene Disc aus einer PS5-Konsole

Du benötigst Folgendes:

  • Einen hellen Raum mit einem Tisch, auf dem du arbeiten kannst.

  • A #1 Phillips or cross-hatch screwdriver. 

  • A small flashlight (optional). 

Note: Don’t turn on or play on your console with the cover off. 

  1. Press and hold the power button for three seconds to turn off your PS5 console, then remove all cables and devices from the console. 

  2. Place the console on a soft cloth on a flat surface and remove the base.

  3. Position the console so the screw hole for the base is facing you, the PS logo is facedown, and the disc slot is on your left side.

  4. Place your palms near the top corners and grip the edge of the cover. Gently pull the cover up and toward yourself. You may hear a click. 
    The cover lifts away.

  5. With the cover removed, look for black rings on the optical drive, including a circle of black plastic film. You can remove this film, or push through it to reach the screw it is covering. (Newer consoles may not have this plastic cover.)

  6. Using a #1 Phillips or a cross-hatch screwdriver, turn the screw CLOCKWISE until the full disc is almost completely visible.

  7. Gently remove the disc. Do not forcibly pull the disc from the optical drive.

  8. Replace the bottom cover by positioning it slightly away (about 2cm or 3/4 inch) from the top edge and sliding it back into place.

  9. You will hear an audible click when the cover is secured. 

  10. Reconnect all cables and turn on the console.

Check the disc for scratches and dirt 

  • Clean a scratched or dirty disc using a lint-free cleaning cloth made specifically for cleaning Blu-ray Discs or DVDs.  
  • Clean the disc by wiping from the center towards the edge of the disc.

Du hast weiterhin Probleme?

Wähle unten dein Problem aus, um weitere Hilfe zu erhalten.

Du brauchst Hilfe? 

Kontaktiere unsere Support-Spezialisten