{NUM}
{OVERLINE}
{TITLE}
{PARAGRAPH}
{FEATURE_ICON}
{FEATURE_TITLE}
{FEATURE_DESC}
Adjust 4K resolution on a PS5 console
How to enable and adjust 4K resolution on a PS5 console
Find out how to enable 4K resolution and adjust video output settings on your PlayStation®5 console.
How to change PS5 console resolution
Your PS5® console detects the capabilities of your TV and automatically selects the best available resolution. You can change your resolution using the PS5 console video output settings.
- Go to Settings > Screen and Video.
- Select Video Output.
From here, you can view your Current Video Output Signal or change your video output settings.
Information for the Connected HDMI Device
View details about the connected HDMI device's resolution, VRR (variable refresh rate), and HDR (high dynamic range).
Resolution
Set the screen resolution. When you select Automatic, it's set to the highest resolution your TV supports.
Test 1440p Output
If your TV supports 1440p output, you can test for SDR/HDR 60 Hz/120 Hz and VRR video output. To use 1440p output, set your Resolution to 1440p.
VRR
Allow the refresh rate to adjust in real time while using TVs and games that support VRR (variable refresh rate).
- Results vary depending on the TV you're using.
- Turn on Apply to Unsupported Games to stabilize the frame rate for games even if they don't support VRR. If you experience unexpected behaviour while playing games, turn off this setting.
120 Hz Output
Turn on to enable 120 Hz video output for your TV and games that support 120 Hz frame rate. If you experience video output problems with these games on a monitor or other display device, turn off this setting.
ALLM
If your TV supports ALLM (auto low-latency mode), it automatically switches to low-latency mode while playing games. Even if you set ALLM to Off, it automatically switches to low-latency mode when you're using VRR output.
- To completely turn off ALLM, you must also set VRR to Off.
Video Transfer Rate
Adjust the transfer rate for 4K resolution video. If you experience flickering on the screen, try selecting -1 or -2 to limit output. This may improve picture quality.
- When you select -1 the following output is limited:
4K 120 Hz
4K 50/60 Hz RGB/YUV444 DeepColour
When displaying 4K HDR content at 50/60 Hz, YUV422 or YUV420 colour format is used.
- When you select -2 the following output is limited:
4K 120 Hz
4K 50/60 Hz RGB/YUV444
When displaying 4K content at 50/60 Hz, YUV420 colour format is used.
HDR
Experience more realistic image detail with an HDR (high dynamic range) TV.
- If you select Always On, even games and apps that aren't HDR-compatible automatically convert to HDR output.
- If you select On When Supported, games and apps that aren't HDR compatible display in SDR (standard dynamic range).
Adjust HDR
Enables fine brightness adjustments and optimized HDR rendering.
Deep Colour Output
Enables smooth image rendering.
RGB Range
Change this only when you use an HDMI device that doesn't send RGB range information correctly.
Is HDMI 2.1 supported on PS5 consoles?
The PS5 console supports the HDMI 2.1 specification, and it also supports 4K 120Hz video output. As this emerging technology isn’t fully supported in the market, Sony Interactive Entertainment is working with TV manufacturers to improve performance and bring the best experience to console users. During this transition period, you may experience some issues with 4K 120 Hz.
PS5 4K 120 Hz troubleshooting
If you encounter a situation where there’s nothing displayed on your TV when the PS5 console is expected to be outputting a 4K 120 Hz signal, or the signal is displayed as 1080p 120 Hz, please consider the following:
- Does the TV claim to support 4K 120 Hz?
- Is the TV using its latest firmware?
- Are you using the cable included with the PS5 console or an Ultra High-Speed Cable that is rated for 4K 120 Hz output?
- Is the PS5 console directly connected to the TV by HDMI, or to a receiver or other piece of intermediary equipment that could be affecting the signal?
- Is the PS5 console connected to an appropriate HDMI port (2.1) on the TV? Check the TV manual for more information. HDMI 2.1 support may require that you change settings via the TV.
- Is the PS5 Screen andVideo > Video Output > Resolution set to Auto or 2160p?
- Is the PS5 Screen andVideo > Video Output > 4K Video Transfer Rate set to Auto?
Is auto low latency mode supported on PS5 consoles?
If your TV supports ALLM (auto low-latency mode), it automatically switches to low-latency mode while playing games. Even if you set ALLM to Off, it automatically switches to low-latency mode when you're using VRR output. To completely turn off ALLM, you must also set VRR to Off.
You can adjust ALLM by going to Settings > Screen and Video > Video Output > ALLM.
The latest system software is required for ALLM.
Please note, your PS5 console doesn’t send an ALLM signal when a media app is running.
Please check the manual of your TV to see if ALLM is supported. For more information, please contact the manufacturer.
Do all TVs with HDMI 2.1 have ALLM?
No, please check the instruction manual that came with the display device to check if it supports ALLM.
What cable is needed for PS5 consoles to use ALLM?
The HDMI cable included with the PS5 console is recommended. Otherwise, an Ultra-High-Speed HDMI Cable that supports HDMI 2.1 should support ALLM.
What HDMI port do I need to use on my TV?
If there is an HDMI port that supports HDMI 2.1, please use it to connect your PS5 console.
Need help?
Get help and support for your PlayStation products