PlayStation Help PlayStation Help & Support


See if this helps...

PS VR aim controller

How to pair the Aim Controller

The PS VR aim controller is a Bluetooth® device. You’ll need to pair your controller when you use it for the first time and when you use it with another PS4™ system. 

With your PS4 system on, connect your controller using a micro USB cable*, then press the 2 (PS) button. Your controller pairs with the system and turns on. After you’ve paired your controller, you can disconnect the micro USB cable and use your controller wirelessly.  

*The PS VR aim controller is not supplied with a micro-USB. Use the micro-USB cable for your DualShock 4 wireless controller.

Doesn't Work / Flashing Light / Won't Pair / Input Lag

If your controller won't pair (the light will flash if this is the problem), won't respond, or has input lag, please follow the instructions on how to reset the controller:

  1. Turn off the PlayStation 4.
  2. The PS VR aim controller is a Bluetooth device. This means that other Bluetooth devices might cause interference. Switch them off to minimize this.
  3. Locate the small reset button on the bottom of the PSVR Aim near the L2 shoulder button.

View full article

Need to contact us?

You can call us on the following numbers:

Bahrain: +973 650009205
Kuwait: +965 22069109
Qatar: 00800100852
Saudi Arabia: 800844 0483 (STC) / 800850 0542 (Non-STC)
UAE: 8000 357 03946

We're here to help you. Opening Hours: (Sun-Thu) 10:30 AM – 7:00 PM AST

We may ask you to provide your PSN account details or console serial number. Please have these handy when you call.

If your country is not listed above, please contact us by email instead.